
Tao Motor 110 ATV Right Side Crank Case Replacement
Share
Tao Motor 110 ATV Right Side Crank Case Replacement
If you own a Tao Motor 110 ATV and are experiencing issues with the right side crank case, it may be necessary to replace it. The crank case is an essential component of the engine, housing the crankshaft and connecting rod. Over time, wear and tear or damage can occur, leading to oil leaks or engine malfunctions. Here is a step-by-step guide on how to replace the right side crank case of your Tao Motor 110 ATV.
Tools and Materials Needed
- Socket set
- Torque wrench
- New right side crank case
- Gasket sealant
- Clean cloth
Step 1: Prepare the ATV
Start by making sure the ATV is turned off and the engine is cool. Put the ATV on a level surface and secure it with a kickstand or wheel chocks to prevent it from rolling.
Step 2: Remove the Right Side Crank Case Cover
Locate the right side crank case cover, which is typically located on the right side of the engine. Use a socket set to remove the bolts securing the cover in place. Carefully lift off the cover and set it aside.
Step 3: Clean the Area
Before installing the new crank case, clean the area thoroughly with a clean cloth. Remove any oil or debris that may have accumulated.
Step 4: Remove the Old Crank Case
Using a socket set, carefully remove the bolts securing the old right side crank case in place. Gently pull the old crank case away from the engine, taking care not to damage any surrounding components.
Step 5: Install the New Crank Case
Apply a thin layer of gasket sealant to the mating surface of the new right side crank case. Carefully align the bolt holes and press the new crank case into place. Secure it with the bolts using a torque wrench, following the manufacturer's recommended torque specifications.
Step 6: Reinstall the Crank Case Cover
Place the crank case cover back onto the engine, ensuring that it is properly aligned. Secure it with the bolts using a torque wrench, again following the manufacturer's recommended torque specifications.
Step 7: Test and Inspect
Start the ATV and let it idle for a few minutes. Check for any oil leaks or abnormal noises. If everything appears to be in order, take the ATV for a short test ride to ensure proper functionality of the new right side crank case.
By following these steps, you can successfully replace the right side crank case of your Tao Motor 110 ATV. Remember to always consult your ATV's manual and follow the manufacturer's instructions for the best results. If you are unsure or uncomfortable performing this task yourself, it is recommended to seek professional assistance.