Tao Motor 50cc Scooter Center Kick Stand Replacement

Tao Motor 50cc Scooter Center Kick Stand Replacement

Tao Motor 50cc Scooter Center Kick Stand Replacement

Replacing the center kick stand on your Tao Motor 50cc scooter is a relatively simple task that can be done with a few basic tools. Whether you are experiencing issues with your existing kick stand or simply want to upgrade to a sturdier one, this guide will walk you through the step-by-step process.

Tools and Materials Needed

  • Socket set
  • Wrench
  • Replacement kick stand
  • Lubricant

Step 1: Preparation

Start by parking your scooter on a flat and stable surface. Ensure that the engine is turned off and the scooter is in the neutral position. This will prevent any accidental movement during the replacement process.

Step 2: Removing the Old Kick Stand

Locate the kick stand on the center of your scooter. Using a socket set or wrench, loosen and remove the bolts securing the kick stand to the frame of the scooter. Carefully remove the old kick stand and set it aside.

Step 3: Installing the New Kick Stand

Take the replacement kick stand and apply a small amount of lubricant to the mounting area. This will help with the installation and ensure smooth operation. Line up the holes on the new kick stand with the mounting points on the scooter frame.

Insert the bolts into the holes and tighten them securely using a socket set or wrench. Make sure the kick stand is firmly attached to the frame without any looseness.

Step 4: Testing

Before taking your scooter for a ride, it's important to test the functionality of the new kick stand. Extend the kick stand fully and ensure that it locks in place. Gently push the scooter to ensure stability and that the kick stand supports the weight of the scooter.

Step 5: Maintenance Tips

Once you have successfully replaced the center kick stand on your Tao Motor 50cc scooter, it's essential to take proper care to ensure its longevity and functionality.

Here are some maintenance tips to keep in mind:

  • Regularly inspect the kick stand for any signs of wear, damage, or loose bolts. If you notice any issues, promptly address them to avoid potential accidents.
  • Keep the kick stand clean and free from dirt and debris. This will prevent any obstructions that may affect its operation.
  • Apply lubricant to the kick stand's moving parts periodically. This will help maintain its smooth functionality.
  • Avoid leaning your scooter on the kick stand for extended periods. Continuous pressure on the kick stand can lead to premature wear and potential failure.
  • Always park your scooter on a level surface to ensure stability and prevent any unintentional tipping.

Conclusion

Replacing the center kick stand on your 50cc scooter is a straightforward process that can be done at home. By following these steps and using the right tools, you can ensure the safety and stability of your scooter. Remember to always double-check the tightness of the bolts and periodically inspect the kick stand for any signs of wear or damage. With a new center kick stand, you can confidently park your scooter without any worries.

Back to blog