Replacing Rear Brake Pads on a Tao Motor 150cc Scooter

Replacing Rear Brake Pads on a Tao Motor 150cc Scooter

Complete Step-by-Step Guide to Replacing Rear Brake Pads on a Tao Motor 150cc Scooter

Regular maintenance of your Tao Motor 150cc Scooter is crucial not only for its longevity but also for your safety on the road. One of the key maintenance tasks is replacing the rear brake pads. In this comprehensive guide, we will walk you through each step of replacing the rear brake pads on your 150cc scooter.

150cc Brake Shoes

Step 1: Gather the Required Tools and Supplies

  • 150cc Brake Shoes – These high-quality brake shoes, specifically designed for 150cc scooters, provide excellent rear drum brake support. 
  • Brake fluid
  • Socket wrench set
  • Jack and jack stands
  • C-clamp
  • Flathead screwdriver
  • Rags for cleaning

Step 2: Prepare Your Scooter

Start by ensuring your scooter is parked on a flat surface. Use the jack to lift the rear end of the scooter and securely support it with jack stands. Remove the rear wheel to access the brake assembly.

Step 3: Remove the Old Brake Pads

Locate the brake caliper assembly housing the old brake pads. Carefully remove the caliper bolts using a socket wrench. Gently detach the caliper from the rotor and take out the old brake pads. Inspect the caliper for any signs of damage or wear.

Step 4: Install the New 150cc Brake Shoes

Clean the caliper and piston using a rag to remove any dirt or debris. Insert the new 150cc Brake Shoes into the caliper, ensuring they are correctly positioned. Slide the caliper back over the rotor and secure it in place with the caliper bolts.

Step 5: Reassemble and Test the Brakes

Reattach the rear wheel to the scooter and lower it to the ground. Slowly pump the brake lever to engage the new brake pads. Check the brake fluid level and top up if necessary. Conduct a thorough inspection to ensure the brakes are functioning correctly before taking your scooter for a test ride.

Maintaining Your Brake System

Regularly inspect your scooter's brake system for any signs of wear, such as squeaking or reduced braking power. Clean the brake components and lubricate moving parts to prevent corrosion. Consider bleeding the brake system periodically to maintain optimal performance.

Conclusion

By following this comprehensive guide, you can effectively replace the rear brake pads on your Tao Motor 150cc Scooter and ensure your safety on the road. Remember, proper maintenance of your scooter's brake system is essential for smooth and secure riding experiences.

Back to blog