How to Change the Axle Carrier on a 150cc Four Wheeler

How to Change the Axle Carrier on a 150cc Four Wheeler

Step-by-Step Guide to Changing the Axle Carrier on a 150cc Four Wheeler

Changing the rear axle carrier on your 150cc four-wheeler is a task that requires precision and attention to detail. The axle carrier plays a crucial role in supporting the axle and the wheel assembly, making it essential for the smooth operation of your vehicle. Here's a comprehensive step-by-step guide to help you navigate through the process:

Tools Needed:

  • Socket Wrench Set
  • Jack and Jack Stands
  • Replacement Axle Carrier

Step 1: Prepare Your Work Area

Start by parking your four-wheeler on a flat, level surface. Secure the vehicle in place to prevent any movement during the repair process. Use a jack to lift the rear of the four-wheeler and place jack stands beneath the frame to provide additional support.

Step 2: Remove the Wheel Assembly

Begin by loosening the lug nuts on the wheel assembly using a socket wrench. Once the lug nuts are removed, carefully detach the wheel assembly from the axle. This step allows access to the axle carrier for inspection and replacement.

150-250cc Axle Housing

Step 3: Access the Axle Carrier

Locate the axle carrier, which is typically positioned between the rear wheels. The axle carrier is responsible for supporting the axle assembly and maintaining proper alignment. Inspect the axle carrier for any signs of damage, wear, or misalignment. If any issues are detected, it's essential to proceed with replacement to ensure the optimal performance of your four-wheeler.

Step 4: Replace the Axle Carrier

Begin by removing the bolts securing the axle carrier to the frame of the four-wheeler. Carefully detach the old axle carrier while paying close attention to the position of any shims or spacers. These components play a vital role in maintaining proper alignment and should be transferred to the replacement axle carrier. When installing the new axle carrier, ensure that it is positioned correctly and utilize the appropriate bolts and hardware to secure it to the frame.

It's crucial to select a high-quality replacement axle carrier to guarantee the durability and reliability of this critical component. Consider the 150-250cc axle housing, specifically designed for TAOTAO models ATA-150G and ATA-250B/C, equipped with a 6006 bearing size, for a seamless fit and uncompromising performance. This axle housing is expertly crafted to meet the demanding requirements of your four-wheeler, providing the assurance of long-lasting functionality and safety.

Proper alignment and secure fastening of the axle carrier are paramount to maintain the integrity and stability of the axle assembly, ensuring the smooth and safe operation of your vehicle.

Step 5: Reassemble the Wheel Assembly

With the new axle carrier securely in place, proceed to reattach the wheel assembly to the axle. Ensure that the assembly is properly aligned and then tighten the lug nuts using a socket wrench to secure the wheel in place. The correct installation of the wheel assembly is essential for the balanced operation and stability of your four-wheeler.

Step 6: Test for Proper Operation

Lower the four-wheeler from the jack stands and gently lower it to the ground. Test the operation of the axle carrier by slowly moving the vehicle back and forth to ensure that the axle assembly functions smoothly without any unusual sounds or wobbling. Additionally, take the four-wheeler for a short test drive to assess the performance of the axle carrier under normal operating conditions. This step allows you to verify the successful replacement and functionality of the axle carrier, providing confidence in the reliability and safety of your vehicle.

Conclusion

By following this comprehensive guide, you can successfully replace the axle carrier on your 150cc four-wheeler, ensuring the safety and optimal performance of your vehicle. The replacement 150-250cc axle housing, suitable for TAOTAO models ATA-150G and ATA-250B/C, with its meticulously engineered design and durable construction, offers the assurance of a seamless fit and dependable functionality, enhancing the overall performance and longevity of your four-wheeler.

For the high-quality 150-250cc axle housing, tailored to meet the specific demands of TAOTAO models ATA-150G and ATA-250B/C, and equipped with a 6006 bearing size, you can find it here.

Back to blog